Blind Rivets - Dome
What is a Dome Rivet?
A Dome Head Solid Rivet is the most commonly used Blind Pop Rivet and is generally what you will be given if you ask for a standard rivet. After installation you will see a slightly raised, neat domed shaped finish. Our Dome Headed Rivets come in a choice of steel, stainless steel, and aluminium.
Blind Rivets are so-called because they can be used to fasten two items together without the operator needing to have access to the rear surface (the blind side) of the items being joined.
The rivet has a stem called a mandrel. The mandrel is inserted into a rivet gun and the protruding body of the rivet is then pushed into the hole and through the materials that are being fastened. The mandrel is then pulled back, forcing the sides of the rivet to expand outwards. When the rivet can expand no further the mandrel snaps off, leaving a neat and tidy finish on both surfaces.
About our Blind Rivet range:
- Dome Rivets are the most common, this option leaves a slightly raised dome finish.
- A Countersunk Rivet fits flush to the surface in a countersunk hole.
- Large Flange Rivets spread the load over a greater area and Sealed Rivets leave a sealed closed-end finish.
- A Triform Rivet splits the body into three parts, which reduces the likelihood of damage to the material, making this the perfect option for soft metal sheets.