Pop Rivets - Dome - A2 Stainless Steel

Using Blind Rivets

The rivet has a stem called a mandrel. The mandrel is inserted into a rivet gun and the protruding body of the rivet is then pushed into the hole and through the materials that are being fastened. The mandrel is then pulled back, forcing the sides of the rivet to expand outwards. When the rivet can expand no further the mandrel snaps off, leaving a neat and tidy finish on both surfaces.

Blind rivets are also available in other head designs including countersunk, large flange, sealed and triform – each in a range of finishes.

About A2 Stainless Steel

A2 stainless steel is often referred to as 304 or 18/8 Stainless. 18/8 actually refers to the amount of chromium and nickel in the alloy - 18% chromium and 8% nickel.

A2 stainless is the most common type of steel used for the manufacture of fasteners and is suitable for general use.